UROVO / Label and receipt printers
D8100 Plus Series: Label and receipt printers
UROVO D8100 Plus Series is an industrial thermal-transfer or direct-thermal barcode printer for warehouse, manufacturing and logistics labels. The official page lists 203/300 dpi options, up to 203 mm/s at 203 dpi, 20-118 mm media and TSPL, EPL, ZPL and DPL command languages. The exact print head, media and interface configuration should be validated before deployment.
Suggested profiles: industrial shipping, manufacturing, warehouse and compliance-label printing
- Processor
- 400 MHz, 32-bit ARM9
- Memory
- 128 MB SDRAM and 128 MB flash
- Printer method
- Thermal transfer and direct thermal modes listed
- Command languages
- TSPL, EPL, ZPL, ZPL II and DPL listed
- Resolution
- 203 dpi or 300 dpi options
- Print speed
- Up to 203 mm/s at 203 dpi; up to 152 mm/s at 300 dpi
The exact model, regional configuration and commercial terms require project confirmation.
Browse by device capability
D8100 Plus Series / Browse by device capability
UROVO is the primary established product resource, with SEUIC (Dongji) and selected platforms used where the capture method, form factor or deployment requirement needs another option. Published models follow an evidence, regional-configuration and RuggedLayer validation path.
Suggested profiles
- Warehouse and shipping labels
- Manufacturing traceability and compliance labels
- Deployments that need ZPL, EPL, TSPL or DPL compatibility under a defined host integration plan
Browse by device capability
- A thermal-transfer and direct-thermal platform for industrial label workflows.
- 203/300 dpi choices and several command languages support different print systems and label requirements.
- The manufacturer lists up to 203 mm/s at 203 dpi and media widths from 20 to 118 mm.
- Ribbon, media, sensor, cutter and interface choices must be validated with the actual label stock and host software.
How a device enters the portfolio
Key specifications
Manufacturer-listed configuration; confirm the exact variant before ordering.
Platform
| Processor | 400 MHz, 32-bit ARM9 |
|---|---|
| Memory | 128 MB SDRAM and 128 MB flash |
Power and physical
| Interfaces | USB 2.0, USB host, serial, 10/100 Ethernet and optional wireless interface listed |
|---|
Environmental
| Environment | Operating 5 to 40 C; storage -25 to +55 C; non-condensing humidity limits listed |
|---|
Other configuration
| Printer method | Thermal transfer and direct thermal modes listed |
|---|---|
| Command languages | TSPL, EPL, ZPL, ZPL II and DPL listed |
| Resolution | 203 dpi or 300 dpi options |
| Print speed | Up to 203 mm/s at 203 dpi; up to 152 mm/s at 300 dpi |
| Maximum print width | 104 mm at 203 dpi; 108.4 mm at 300 dpi |
| Media width | 20-118 mm; 0.06-0.254 mm thickness listed |
| Ribbon | Up to 67 mm outside diameter, 300 m length and 30-110 mm width listed |
| Physical | 280 x 190 x 198.3 mm; 2.7 kg; double-layer ABS housing listed |
A final shortlist depends on the application, scan or RFID workload, operating environment, country, deployment volume and support expectations.
A clear handoff at every layer
Five service layers for a more predictable device program.
RuggedLayer organizes access to multiple manufacturers into a consistent engagement model. Each layer has a defined input, deliverable and evidence boundary.
Service layers
- Choose the print method, head resolution, media, ribbon, sensor and cutter combination from the label specification.
- Test command-language compatibility, USB, serial, Ethernet or wireless behavior and queue recovery with the production system.
- Freeze calibration, maintenance, print density, darkness, speed, roll handling and spare-parts procedures before rollout.
Deployment accessories
- Scope the power supply, ribbon cores, media holders, cable or network option, cutter and maintenance parts with the printer.
- Keep approved media, ribbon, command-language profile and calibration instructions versioned with the deployment handover.
RuggedLayer Test Lab
Define a useful test, not a vague benchmark.
Tell us the labels, tags, application and operating conditions that matter.
- 01
Print representative labels with text, graphics and barcodes at both resolution options and required speeds.
- 02
Test media sensing, ribbon detection, calibration, cutter or tear behavior, host reconnect and offline queue recovery.
- 03
Measure print quality, media consumption, maintenance access and throughput over a representative production run.
Project intake
D8100 Plus Series / Start with enough context to make the next step useful.
Choose the closest project intent and describe only non-confidential workflow, application and deployment requirements.