SEUIC (Dongji) / Handheld RFID readers
AUTOID UTouch: Handheld RFID readers
SEUIC (Dongji) AUTOID UTouch is an Android UHF RFID handheld for inventory, asset tracking and combined barcode and RFID collection. The official page lists a removable 6400 mAh battery, integrated UHF, optional HF/NFC and barcode capture, IP65 protection and manufacturer references for long-range and high-density tag work.
Suggested profiles: mobile UHF inventory, asset tracking and combined barcode workflows
- Operating system
- Android 11.0
- Display
- 5.2 inch 1920 x 1080 or 5.0 inch 1280 x 720 display options
- RFID
- EPC C1 Gen2 / ISO18000-6C; 4 dBi circular antenna; 840-960 MHz and 1-33 dBm are listed
- Battery
- Removable 6400 mAh battery with QC3.0 and handle charging-stand support
- Protection
- IP65; manufacturer lists a 1.5 m drop reference
- Processor
- Cortex-A53 octa-core, 1.8 GHz
The exact model, regional configuration and commercial terms require project confirmation.
Browse by device capability
AUTOID UTouch / Browse by device capability
UROVO is the primary established product resource, with SEUIC (Dongji) and selected platforms used where the capture method, form factor or deployment requirement needs another option. Published models follow an evidence, regional-configuration and RuggedLayer validation path.
Suggested profiles
- Warehouse cycle counts and receiving
- Asset and tool tracking
- Retail or field workflows combining RFID and barcode capture
Browse by device capability
- The integrated UHF handle supports mobile inventory without a separate sled.
- Optional barcode and HF/NFC capture can combine multiple identification tasks in one workflow.
- A removable 6400 mAh battery and charging stand support planned shift rotation.
- Range and tag-rate values are manufacturer references using stated tags and conditions, not site guarantees.
How a device enters the portfolio
Key specifications
Manufacturer-listed configuration; confirm the exact variant before ordering.
Platform
| Operating system | Android 11.0 |
|---|---|
| Processor | Cortex-A53 octa-core, 1.8 GHz |
| Memory and storage | 4 GB RAM / 64 GB storage |
| Display | 5.2 inch 1920 x 1080 or 5.0 inch 1280 x 720 display options |
Data capture
| RFID | EPC C1 Gen2 / ISO18000-6C; 4 dBi circular antenna; 840-960 MHz and 1-33 dBm are listed |
|---|
Power and physical
| Battery | Removable 6400 mAh battery with QC3.0 and handle charging-stand support |
|---|
Environmental
| Protection | IP65; manufacturer lists a 1.5 m drop reference |
|---|---|
| Environment | Operating -20 to +50 C; storage -40 to +50 C with battery or -40 to +70 C without battery |
Other configuration
| RF performance reference | At least 8 m and up to 900 tags/s with an Impinj H47 reference tag under stated conditions |
|---|---|
| Capture | Optional HF/NFC, barcode and 13 MP rear or 5 MP front camera options are listed |
| Security and expansion | Micro SIM, optional micro PSAM and Micro SD up to 128 GB |
| Physical | 156 x 79.5 x 127.5 mm; approximately 480 g including battery |
A final shortlist depends on the application, scan or RFID workload, operating environment, country, deployment volume and support expectations.
A clear handoff at every layer
Five service layers for a more predictable device program.
RuggedLayer organizes access to multiple manufacturers into a consistent engagement model. Each layer has a defined input, deliverable and evidence boundary.
Service layers
- Select display, scan engine, UHF region, SIM, PSAM, battery, camera and storage options before application testing.
- Pilot target tags, materials, density, movement, barcode conditions, NFC behavior and application recovery.
- Review Android 11 lifecycle, MDM, regional RF compliance, charging and carry requirements before rollout.
Deployment accessories
- Scope spare 6400 mAh batteries, charging stand, hand strap, protective parts, scan handle and PSAM accessories.
- Keep the RFID profile, scan profile, MDM enrollment, host event contract and battery rotation plan with the handover.
RuggedLayer Test Lab
Define a useful test, not a vague benchmark.
Tell us the labels, tags, application and operating conditions that matter.
- 01
Measure read, write, missed and stray events with target tags and barcode samples across the intended zone.
- 02
Test application performance, battery endurance, charging, UHF and Wi-Fi behavior, NFC and offline recovery.
- 03
Freeze the exact display, firmware, RF profile, scanner, battery, accessories and acceptance criteria.
Project intake
AUTOID UTouch / Start with enough context to make the next step useful.
Choose the closest project intent and describe only non-confidential workflow, application and deployment requirements.